Honda Civic / CR-V Rear Sway Bar Bushings - 18 mm

Honda Civic / CR-V Rear Sway Bar Bushings - 18 mmPolyurethane rear sway bar bushings for the 2002 2006 7th Gen Honda Civic replace the loose and spongy stock rubber bushings. The urethane bushings hold up better than rubber, which become more pliable over time. This causes the sway bar to lose its effectiveness. Urethane bushings will help restore precision and rigidity to the swaybar mounts and make the anti roll bar perform better. Price includes the pair of rear sway bar bushings and a lifetime

Polyurethane rear sway bar bushings for the 2002-2006 7th Gen Honda Civic replace the loose and spongy stock rubber bushings. The urethane bushings hold up better than rubber, which become more pliable over time. This causes the sway bar to lose its effectiveness. Urethane bushings will help restore precision and rigidity to the swaybar mounts and make the anti-roll bar perform better. Price includes the pair of rear sway bar bushings and a lifetime warranty.Unlike other urethane bushings using only one or two urethane grades, Powerflex design engineers choose the correct hardness to allow for the specific movement or rigidity required for each component while minimizing unwanted NVH. Bushings are typically produced in one of three grades – Yellow (70-80A, approximately 25% stiffer than stock), Purple (80-90A, approximately 30% stiffer than stock), and Black (90-95A, approximately 80% stiffer than stock).

Diagram Reference #26

This part fits the following models:
Acura
RSX
Honda
CR-V (2002-2006)
Civic
Civic Mk7 EP/EU including Si & Type R (2001-2005)
Civic Mk7 EP/EU including Si & Type R (2001-2005)