Stage 4 Clutch Kit (1MD) for Nissan Skyline GTR 1993-1998 2.6L DOHC (RB26DETT) Twin Turbo (Pull Type) AWD
SKU: 80737762273

Stage 4 Clutch Kit (1MD) for Nissan Skyline GTR 1993-1998 2.6L DOHC (RB26DETT) Twin Turbo (Pull Type) AWD

$305.98 $339.98
Save 10%
No.2 Bestseller on asantecanada.ca >

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Jul 5 - Jul 10

Promo Codes Available:

For Your Every Summer RSVP, with Code: SUMMER15

Description

Stage 4 Clutch Kit (1MD) for Nissan Skyline GTR 1993-1998 2.6L DOHC (RB26DETT) Twin Turbo (Pull Type) AWDAction Clutch's Stage 4 (1MD) Clutch Kit is designed to withstand even the most challenging conditions. Featuring a heavy duty single diaphragm pressure plate, reinforced drive straps, and an Unsprung MIBA Ceramic (available in a 4 or 6 puck) disc, this kit provides peak performance and extreme durability for low mild horsepower vehicles. Our Unsprung MIBA Ceramic clutch kit provides quicker engagement and will introduce some clutch chatter, which

Action Clutch's Stage 4 (1MD) Clutch Kit is designed to withstand even the most challenging conditions. Featuring a heavy-duty single diaphragm pressure plate, reinforced drive straps, and an Unsprung MIBA Ceramic (available in a 4 or 6 puck) disc, this kit provides peak performance and extreme durability for low/mild horsepower vehicles. Our Unsprung MIBA Ceramic clutch kit provides quicker engagement and will introduce some clutch chatter, which will minimize after proper break-in. For those looking to take their dedicated race vehicles to the next level, the Stage 4 (1MD) Action Clutch Kit provides maximum control and power with little compromise on reliability.

At Action Clutch, every kit is quality checked by one of our experienced engineers (with over 60 years of collective experience) and signed off as safe before being released as a finished product. This gives you peace of mind knowing that your Action Clutch will perform consistently every time.

NOTE: Purchasing the wrong type of clutch kit for your specific engine power output can result in premature clutch failure, damage to the transmission and void warranty eligibility. If you’re unsure what kit is right for you, contact Action Clutch direct.

RACE APPLICATIONS / DRAG / ROAD / DRIFT RACING

ft/lbs

What’s Included
  • Unsprung MIBA Ceramic 6 Puck Disc
  • Single Diaphragm HD Pressure Plate
  • Pilot Bearing / Bushing (when applicable)
  • Clutch Alignment Tool

Break-in Requirements
500 street miles / Keep RPM’s under 4500, no more than half-throttle, no boost (if applicable).
Proper break-in is required in order to retain product warranty, ensure longevity and holding capacity.

Disclaimers
Ceramic based clutch discs intend to increase the holding capacity and durability of the clutch as opposed to an increased life expectancy. Using a ceramic based material for easy street driving may contribute to premature wear of the clutch kit due to the harsher engagement and because of the higher tendency to slip the clutch during street driving.

Using a clutch kit with an unsprung clutch disc on a stock or lightly modified power engine that is daily/street driven vehicle can break the rivets on the clutch disc hub. Unsprung clutch kits are not designed for daily/street use or any constant on/off engagement environment. This can be compared to running a marathon in sandals vs a proper running shoe. If you were to run the marathon in sandals, you have no cushion or comfort and can cause injuries or wear you down faster than using proper running shoes.

*Increase in holding capacity is rated in Crank Torque, not Wheel Torque




SFI Spec 1.1 Replacement Flywheels and Clutch Assemblies

California Residents: Prop 65 WARNING: This product MAY contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling. For more information, visit www.P65Warnings.ca.gov



 

*High-performance racing component. May be used in dual-purpose vehicles. Not intended as OEM replacements. This part is built with performance characteristics.

Shipping Notes
  • Free Standard Shipping on $100+ Orders to the USA.
  • Except Preorder products are shipped in 48 hours.
  • Delivery to the USA:
  1. Standard Shipping : 3-10 business days
  • If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
  • We offer a 30-day return/exchange service after receiving.
  • Final sale items are not eligible for returns or exchanges.
  • To process your return/exchange, please contact us at [email protected]
  • Please click here for more details>>> Return & Exchange Policy
SKU: 80737762273

Discover Niche Categories That Outsell

Top-Converting Item to Boost Your Average Order

4.4 ★★★★★
Based on 2325 reviews
Sort
Highest Rating
Newest First
Oldest First
Product Reviews
S
shannon oakley
Lake Worth, US
★★★★★ 5
Great room divider
Color: Black, Size: 4 Panel-88'', Color: Black, Size: 4 Panel-88''
This is a room divider and would work great as one! I’m using it as a cover for my car port/garage so you can’t look in and see my messy garage as easily and for what I’m using it for it’s a little not quite as sturdy as I need it to but I’m sure it’s not meant to be used outside anyways so I don’t fault the product since I’m not using it as intended… with that said though…. It still covers my garage beautifully and really does exactly what a I need it to! I’m sure the wind may blow it over if it gets too crazy but I don’t see it breaking by any means. The frame is metal and drilled together using long screws. It’s very well built. The cloth for the panels is this waterproof type material that’s kind of like the gazebo roof feeling. So it’s easy to clean and it’s easy to wipe. You can put it straight or bend the panels and either way it still stands up. You don’t HAVE to bend it to make it stand or anything. You can literally use it straight across like I am in the pictures. Overall very happy with this product and it’s also very tall so it truly covers a lot (hides a lot lol). I’m 5’8 so you can see it’s taller than me by the pic I took
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 4, 2026
F
3fingers
Omaha, US
★★★★★ 3
OK. Drag to setup. Needs more stable feet
Color: Black, Size: 4 Panel-88''
I was glad to find these. The benefits of having them in a recording setup is helping suppressing noise for a vocal booth. It's a layer that surrounds the recording box. Nice! (But away from audio hardware or DAW). Here is the not so nice part: The feet! It's able to stand (as it needs to do this). But it cannot be bumped. If it does, it's coming down onto something. I believe the feet units are not wide enough (or long enough). That makes for an easier tumble risk. So far, they haven't, but it's like being in the woods over leaves - it feels dangerous with every step! (That's actually true). They are tall enough, wide enough, material OK. But the feet for the main assembly do not seem sturdy enough. There are ways to help that. I'm thinking a 2x4 to augment the base. Make them wider. It can be done. It was a drag to set these up, and I'm sure to modify them like i'd want them. But, they do come in at a much lower price that other similar dividers. Consider all this because I've seen more solid dividers ( with padding) that would basically be the 1/2 cost of these. But i'd think they'd be easier to assemble, stand sturdier, and without that feeling of an impending fall (or fail). This is my opinion. I hope it helps.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 29, 2026
A
Verified Purchase
Amazon Customer
Los Angeles, US
★★★★★ 1
wrong size of metal components. incorrect items. non functioning
Color: Black, Size: 4 Panel-88''
The owner of this product sent me the incorrect pieces when I tried to install. It didn’t fit. The pieces were missing holes and once I connected the wrong pieces after knowing now they’re stuck and I can’t return them even though Amazon was kind enough to refund me. I just want to warn people this product is such a disappointment because it looks good. It’s good price, but you can’t even assemble the thing very disappointed.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 31, 2026
F
foundbyXtopher
Bozeman, US
★★★★★ 4
Sturdy Folding Room Divider with Good Privacy Coverage and Modern Look
Color: Black, Size: 4 Panel-88''
I picked this room divider up to help separate space in a room without needing permanent walls, and overall it works very well for creating privacy while still looking clean and modern. The size is one of the biggest advantages. At 6 feet tall and roughly 88 inches wide, it creates a noticeable visual separation and works well for apartments, dorms, offices, studios, shared rooms, or content creation setups where you want to hide clutter or define different areas. The black fabric and frame design give it a simple modern appearance that blends easily into most spaces without looking overly decorative or outdated. It has a clean minimalist look that works especially well in offices, bedrooms, gaming rooms, or studio environments. Assembly was fairly straightforward overall. Once fully put together, the divider feels reasonably stable for normal indoor use. The folding panel design also makes it flexible enough to angle different ways depending on the room layout. The portability is another strong point. Since it folds down, it is much easier to move or reposition compared to permanent partitions or heavier wooden dividers. That makes it practical for temporary privacy setups or changing room layouts frequently. Privacy performance is solid visually. It blocks sightlines well enough for changing areas, workspaces, video backgrounds, or separating sections of a room. The fabric also softens the space slightly instead of feeling harsh or industrial. One thing worth noting is that while it provides visual privacy, it is not soundproof. It helps define space and reduce some openness, but conversations and noise will still pass through normally. The material quality feels decent for the price range. The frame is lightweight but functional, though I would still avoid rough handling or constant aggressive repositioning over time. Value for money is good considering the size, flexibility, and convenience. Similar room dividers can become expensive quickly, especially for taller multi-panel setups. Overall, this is best for anyone needing an affordable flexible way to create separation and privacy in shared or open spaces. It works especially well for apartments, dorms, offices, studios, remote work setups, or content creators wanting a cleaner background without permanent construction.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 8, 2026
R
RealDeal
Lake Worth, US
★★★★★ 5
Looks nice but it's not very stylish, works as intended, happy with purchase
Color: Black, Size: 4 Panel-88''
This 6 ft room divider is exactly what I needed and works great! It was very easy to set up and took only a few minutes to assemble. I was pleasantly surprised by how lightweight it is, and it folds up easily for storage when not in use. The fabric-style panels look nice and provide good privacy, and the included clips help keep everything neatly in place. It’s a simple but effective design that does what it’s supposed to do. Because it’s lightweight, it may need a bit of extra support depending on where you place it—I used small weights on the base, and that completely solved the stability issue. Overall, I’m very happy with this purchase. It’s practical, easy to use, and a great value for the price. I would definitely recommend it! Industrial
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 22, 2026

recommand products

Beaumont Lantern
722.00
2023 J. de Villebois Sancerre 750ml
32.88
Aquila Major
4135.00
Charming by LAURENZ V. Gruner Veltliner 750ml
33.88
48" 2-Tier Tandem with Drum Luminaires
2360.00