Roll Cage CITROËN Xsara (Phase 1/2 ) 3-doors Hatchback MULTIPOINT WELD IN V3

Roll Cage CITROËN Xsara (Phase 1/2 ) 3-doors Hatchback MULTIPOINT WELD IN V3This Roll Cage is manufactured according to FIA Appendix J in the following versions: Citron Xsara 2. 0 VTS AST Multipoint Weld In V3 roll cage with 10 points to the bodyshell. The reinforcement plates are 3mm thick steel and are designed and manufactured specifically for each car, achieving maximum safety and fitting on the chassis. The roll cage is delivered in welding kit, and unpainted, and is composed of a main hoop of 45mm diameter in E355

This Roll Cage is manufactured according to FIA Appendix J in the following versions: Citroën Xsara 2.0 VTS

AST Multipoint Weld In V3 roll cage with 10 points to the bodyshell. The reinforcement plates are 3mm thick steel and are designed and manufactured specifically for each car, achieving maximum safety and fitting on the chassis. The roll cage is delivered in welding kit, and unpainted, and is composed of a main hoop of 45mm diameter in E355 steel, the rest of the structure is made of 40mm diameter in E355 steel.

Thanks to our laser scanner technology we guarantee an accurate 3D design that suits in your vehicle.

In the price of this article are included:

- Welding kit

- Gussets

- Reinforcement plates

- Screws, washers and nuts

- Individual documentation

- Installation manual

- Sticker set

- Welding T sample

* This structure is designed and built according to the FIA Annex J. Consult with your Federation / Sports Organization the minimum safety requirements specific to your vehicle, version, engine and type of test and / or championship to be played, even if this roll cage fits in all model engines.

* These structures require adaptations and / or cancellations of interior elements of the vehicle (dashboard, door panels, upholstery, rear seats ...)