Stage 6 Clutch Kit (2MD) for Subaru Forester XT 2014-2017 2.0L DOHC (FA20F) Turbo AWD Includes OEHD Flywheel
SKU: 22071688439

Stage 6 Clutch Kit (2MD) for Subaru Forester XT 2014-2017 2.0L DOHC (FA20F) Turbo AWD Includes OEHD Flywheel

$372.92 $414.36
Save 10%
No.2 Bestseller on asantecanada.ca >

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Jul 5 - Jul 10

Promo Codes Available:

For Your Every Summer RSVP, with Code: SUMMER15

Description

Stage 6 Clutch Kit (2MD) for Subaru Forester XT 2014-2017 2.0L DOHC (FA20F) Turbo AWD Includes OEHD FlywheelAction Clutch's Stage 6 (2MD) Clutch Kit allows for maximum performance of mid ranged powered vehicles. Our heavy duty pressure plate is designed with a dual clamp load diaphragm and reinforced drive straps, creating an extremely durable system that you can rely on. This Unsprung clutch kit features a MIBA Ceramic (available in a 4 or 6 puck) disc. With lightning fast, on off engagement and minimal clutch chatter after proper break in. This clutch kit

Action Clutch's Stage 6 (2MD) Clutch Kit allows for maximum performance of mid ranged powered vehicles. Our heavy-duty pressure plate is designed with a dual clamp load diaphragm and reinforced drive straps, creating an extremely durable system that you can rely on. This Unsprung clutch kit features a MIBA Ceramic (available in a 4 or 6 puck) disc. With lightning-fast, on/off engagement and minimal clutch chatter after proper break-in. This clutch kit is ideal for harnessing all the power and performance you need out of your dedicated race vehicle without compromising reliability or longevity.

At Action Clutch, every kit is quality checked by one of our experienced engineers (with over 60 years of collective experience) and signed off as safe before being released as a finished product. This gives you peace of mind knowing that your Action Clutch will perform consistently every time.

RACE APPLICATIONS / HEAVY TRACK USE / LIGHT STREET USE

High-performance racing component. May be used in dual-purpose vehicles. Not intended as OEM replacements. This part is built with performance characteristics.

Torque Holding Capacity: 628 ft/lbs

Note: Clutch and flywheel must be used together as a set without reusing any existing components

 
What’s Included
  • Dual Clamp Load HD Pressure Plate
  • Conventional Release Bearing
  • Includes OEHD Flywheel


Break-in Requirements
500 street miles / Keep RPM’s under 4500, no more than half-throttle, no boost (if applicable).
Proper break-in is required in order to retain product warranty, ensure longevity and holding capacity.

Disclaimers
Ceramic based clutch discs intend to increase the holding capacity and durability of the clutch as opposed to an increased life expectancy. Using a ceramic based material for easy street driving may contribute to premature wear of the clutch kit due to the harsher engagement and because of the higher tendency to slip the clutch during street driving.

Using a clutch kit with an unsprung clutch disc on a stock or lightly modified power engine that is daily/street driven vehicle can break the rivets on the clutch disc hub. Unsprung clutch kits are not designed for daily/street use or any constant on/off engagement environment. This can be compared to running a marathon in sandals vs a proper running shoe. If you were to run the marathon ins sandals, you have no cushion or comfort and can cause injuries or wear you down faster than using proper running shoes.

*Increase in holding capacity is rated in Crank Torque, not Wheel Torque




SFI Spec 1.1 Replacement Flywheels and Clutch Assemblies


California Residents: Prop 65 WARNING: This product MAY contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling. For more information, visit www.P65Warnings.ca.gov



Shipping Notes
  • Free Standard Shipping on $100+ Orders to the USA.
  • Except Preorder products are shipped in 48 hours.
  • Delivery to the USA:
  1. Standard Shipping : 3-10 business days
  • If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
  • We offer a 30-day return/exchange service after receiving.
  • Final sale items are not eligible for returns or exchanges.
  • To process your return/exchange, please contact us at [email protected]
  • Please click here for more details>>> Return & Exchange Policy
SKU: 22071688439

Discover Niche Categories That Outsell

Top-Converting Item to Boost Your Average Order

4.9 ★★★★★
Based on 2221 reviews
Sort
Highest Rating
Newest First
Oldest First
Product Reviews
C
Verified Purchase
Cynthy
Lexington, US
★★★★★ 5
Nice chair, w/ good cust support
Color: Black, Style: Classic
I apologize for length, but if I am doing a review for other people I assume you want to have as much info as possible to make a decision. I feel this chair is for tall/fat/both so will review it as such. At 6’4” @ 350lbs I fit into both, but reviewing based upon my body, yours is different so adjust according. TLDR – Would buy again, cavernous comfy chair with excellent customer support. Only personal dings against chair are the back could be taller, but added back due to support. Parts + Fit/Finish + Assembly: The parts have some heft and feel solid as expected for a chair designed for heavy people. Material and stitching look proper and I see no flaws. My box was beat to hell and ripped opened at one point. Packing material took the hit and did its job as the items were unaffected. The gas cylinder for the chair was missing and assume lost during shipping. (see customer service). Assembly was standard office chair fare with simple and clear instructions. Wheels / Height / Controls: I normally wouldn’t think of mentioning wheels, but it’s different than expected. They are good, maybe too good. A slight kick to push you back on wood floors sends you flying. The height adjustment for me is good/standard. At full height my feet are flat on the floor and where I would have the chair even if it went higher. My wife (5’6”) at that height is about 2.5 inches above the floor. Taller people than myself may wish for more height. Chair controls are standard fare and operate smoothly Seat: It’s large and with the arms is there is nothing even close to your hip/legs. I can put my fist on my hips and my arms barely touch the chair arms. This is why you are thinking of this chair, and for that you will not be disappointed. The seat is not pillow soft and IMHO a little firmer than I liked at first, but after a few days got broken in or I adjusted. I am a programmer + gamer so spend a lot of time in the chair for hours on end. Comfortable and no complaints at all. Seat depth for me is ~1” from my knee and good with roughly 20.5” usable butt/thigh length. That should be fine for big/tall but may be a bit much for big/short. Measure your current chair and decide from there. Back: The back lets the chair down a bit for me, the big/tall user, as the target seems to be big/short users. The back ends just below my shoulder-line. That obviously means no leaning my head back and the headrest is squarely on my shoulder blades. Not uncomfortable, but I’d prefer a taller back. For me personally I’d like it to be extended 4”, but that would likely be an issue for shorter users. I feel if the manufacturer increased the back by 2 inches it would be an ideal compromise for all users. The chair has an inflatable lumbar support, which I did not use as I personally find those uncomfortable. Also note the chair is designed for a more proper posture with a 90deg back and not a more relaxed 100-110deg. Neither pro/con as personal preference. Arms: The design of the arms being supported by rear only as mentioned earlier allow for an abundance of hip/thigh space. This is an excellent ergonomic design with a potential caveat. More stress will be placed upon the connection/joint. The joint for this chair is just shy of 4” so seems beefy but only time will tell if it holds up to the lateral force of leaning on it while reading. My chairs tend to last 5-7 years, due to the right arm feeling wobbly or the chair leaning to the right. The arm adjustments provide a nice front/back of ~3”, from touching chair back to 3” gap between chair/armrest. The height is similar and also moves the armrest forward about another 2”. At full forward/up the armrest are higher than I like so should easily accommodate taller users. Customer Service My chair was missing a part that I suspect was lost during shipping due to box condition. I contacted them Sun (7/20/2025 @ 1201). At 2228 that night I received a response that they acknowledged the issue and gave a tracking order for the missing part. The part arrived Mon 7/28 and gave a few days to test it out for review Fri (8/1). Obviously you don’t want an issue, but if an issue arises how a company handles it tells you a lot IMHO on how they feel about their product. I am very pleased with their handling of the matter.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on August 4, 2025
A
Verified Purchase
Amy
New York, US
★★★★★ 5
Great Chair
Color: Black, Style: Classic
The durability, recline, noise, fit, and appearance, and stability of the chair were all fantastic. As someone of a shorter height, the backrest which is normally way to high or short for my head fits perfectly. The chair itself is easy to assemble and very comfortable to sit in for long hours. I tend do a lot of work at home and this chair feels very comfortable without feeling the need to get up. The chair looks great set up in my office and is honestly a great office chair. For moving around a room, the wheel guides across my carpet very smoothly with struggling unlike my previous chair which would need a heavy push. Not only that, the chair is noiseless which is a plus for people who get bothered by little sounds when moving around. The fit could honestly fit anyone of any size as the chair itself is quite wide and roomy for me. The seat is also made up of faux leather and feels well stitched and quite durable.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 4, 2026
T
Verified Purchase
Texgun
Omaha, US
★★★★★ 4
Decent Price
Color: Black, Style: Classic
Chair arrived and was missing critical component so that I could not assemble it. Contacted seller and they sent me a similar component within 2 weeks. Chair was now easy to assemble and very comfortable to use for long periods. Although I wished it could raise another two inches. Also be aware chair might be challenging to get thru a standard 29-30inch doorway but not impossible. Thank You Seller for your help.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on October 23, 2025
L
Verified Purchase
Lisa
Los Angeles, US
★★★★★ 5
Easy installation and comfortable
Color: Black, Style: Classic, Color: Black, Style: Classic
This chair features a premium, quilt-stitched design with thick cushioning that immediately feels supportive. Installation is straightforward — the major components align cleanly, and the hardware fits without forcing, allowing the entire setup to be completed quickly. Once assembled, the chair provides excellent comfort: the padded headrest, wide seat, and soft armrests create a stable, ergonomic sitting experience suitable for long work sessions. The overall build feels solid, and the smooth-rolling casters add to the ease of use.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 19, 2026
A
Verified Purchase
Adyelle
Pawtucket, US
★★★★★ 3
Seat angle problem
Color: Black, Style: Classic
This chair is very good. Has exactly the dimensions I was looking for. Overall it looks very well made, excellent quality, easy to install. I'm not giving it 5 starts because I'm not liking the angle of the seat very much. It goes low at the back end and at the front it is very high. It feels really good when I'm working on my computer where I have 1 widescreen monitor with 2 smaller ones on top, so it is very comfortable there. But not so much when I'm just working on my desk filling forms and reading papers. I'm actually getting low back pain. I wrote the seller to ask if there is any kind of adjustment I can make but it doesn't look to me like there is anything than can be done. I'm still keeping it.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on June 8, 2026

recommand products

Army Sleeve Braid: Aviation - ultramarine blue
21.90
Army Shoulder Strap: Colonel Transportation - female
60.00
Army Combat Service Identification Badge (CSIB): USA Element Special Operations
25.50
14k White Gold Real Diamond and Citrine Heart Pendant
303.50
14k White Gold Real Diamond and Emerald 4 Flowers Pendant
598.50