Maker's Edition - The Imperial Palm

Maker's Edition - The Imperial PalmNovember '24 Makers Edition was conceived and led by one of our makers, Fermin Rossi, who was a jeweller before joining our team. Fermin came up with the idea and then developed it together with our founder Tomer into its final design. Each knife is Numbered with only 18 made. The blades are made from 3mm stock Japanese Cladded SG2 steel by Takefu, an exquisite high carbon stainless which was hardened to 62 HRC and hand ground very thinly here at the

November '24 Maker’s Edition was conceived and led by one of our makers, Fermin Rossi, who was a jeweller before joining our team. Fermin came up with the idea and then developed it together with our founder Tomer into its final design. Each knife is Numbered with only 18 made.

The blades are made from 3mm stock Japanese Cladded SG2 steel by Takefu, an exquisite high carbon stainless which was hardened to 62 HRC and hand ground very thinly here at the shop, then patina'd and hand sharpened by Master Ayanori Suzuki.

The elaborate pommel and bolster are cast in brass and hand polished and assembled onto expertly milled paper Ivory Micarta scales with a Black paper Micarta frame piece to accentuate the San-mai construction of the steel. All fastened with a brass bolt at the back. 

These weigh in at around 250-260gr (0.55lbs) each, with 345mm (13.5’’) total length and 2055mm blade length (8’’) and 57mm (2.25'') blade hight at the heel.